UNS S20200 Angle, SS 202 Angle, AISI SS 202 Stainless Steel 202 Angle Supplier, Manufacturer and Exporter in India
Din 1.4373 SS 202 Angle, SS UNS S20200 Angle, Stainless Steel 202 Angle, 202 Stainless Steel 202 Angle Suppliers in India.
Type 202 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 202 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Type 201 can be substituted for Type 301 in many applications
Typical applications for Types 202 are cookware, hose clamps, piston rings, transit car structural member, transit car roofing/siding, thermal window spacers, air bag containers, and truck trailer posts and door frames.
The annealing temperature for Type 202 is between 1850-2000°F. Rapid cooling through the carbide precipitation range (1500 – 800 ° F) is necessary to keep the carbides in solution and prevent sensitization. Type 201 is not hardenable by thermal treatment; it is only hardenable by cold working.
Type 202 has similar bending, forming and drawing characteristics to Type 301 stainless steel
Type 202 can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels. Filler metal of the conventional chromium-nickel analyses can be used. Like other austenitic stainless steels where carbon is not controlled below 0.03%, Type 202 is susceptible to intergranular corrosion in the weld heat affected zone.
Type 202 is resistant to a wide variety of mild to moderately corrosive environments. It has corrosion resistance approaching that of Types 301and has been successfully substituted for 304 in many mild environments.
|Manganese||5.5 - 7.5|
|Chromium||16 - 18|
|Type||Yield Strength 0.2% offset (KSI)||Tensile Strength (KSI)||% Elongation
(2" Gauge length)
|201 Ann||38 min.||75 min.||40% min.||HRB 95 max.|
|201 ¼ Hard||75 min.||125 min.||25.0 min.||25 – 32 HRC (typical)|
|201 ½ Hard||110 min.||150 min.||18.0 min.||32 - 37 HRC (typical)|
|201 ¾ Hard||135 min.||175 min.||12.0 min.||37 – 41 HRC (typical)|
|201 Full Hard||145 min.||185 min.||9.0 min.||41 – 46 HRC (typical)|
|Density (lb./ in^2) @ RT||0.283|
|Modulus of Elasticity in Tension (psi x 10^6)||28.6|
|Specific Heat (BTU/o F/lb.)||32 to 212 °F||0.12|
|Thermal Conductivity (BTU/hr/ft^2/ft)||212°F||9.4|
|Mean Coefficient of Thermal Expansion (in. x 10^-6 per °F)||32 to 212°F||8.7|
|32 to 600°F||9.7|
|32 to 1,000°F||10.2|
|Electrical Resistivity (micro ohms - cm)||at 70oF||69|
|Melting Point Range (oF)||2550/2650|
|Oxidation Resistance - Continuous Service(oF)||1550|
|Oxidation Resistance - Intermittent Service(oF)||1500|
WHY TO CHOOSE HARSH STEEL STAINLESS STEEL ANGLE BARS?
- Corrosion resistance
- Very sturdy
- Easy to install
- Fire and heat resistance
- Rust free
- Abrasion free
HARSH STEEL STAINLESS STEEL ANGLE BARS USED IN?
- Architectural applications
- Transmission towers
- Hoisting and conveying machinery
- Industrial furnace
- Reaction tower
- Container frame and warehouse shelves
- Multi-storied building
- Finish:Hot Rolled Annealed & Pickled (HRAP)
- Length: 3 to 7 Meters / 12 to 24 feet
- End Finish: Both ends are marked with special colors
- Size tolerance : ASTM A276/484 / DIN 1028
- Packing: Bars are packed in 500 to 1,000 kgs bundles in waterproof HDPE cloth Standard Export Seaworthy.
- Delivery: Within 60-70 Days from the order finalization
- Grades : AISI 201, 202, 204cu, 304, 304L, 316, 410, 420, 430
|Width (mm)||Thickness (mm)||Width (Inches)||Thickness (Inches)|
|20 x 20||3 to 5||3/4"||1/8 to 1/4|
|25 x 25||3 to 5||1"||1/8 to 1/4|
|30 x 30||3 to 5||1.1/8||1/8 to 1/4|
|32 x 32||3 to 6||1.1/4||1/8 to 1/4|
|35 x 35||3 to 6||1.3/8||1/8 to 1/4|
|38 x 38||3 to 6||1.1/2||1/8 to 1/4|
|40 x 40||3 to 6||1.5/8||1/8 to 1/4|
|45 x 45||3 to 6||1.3/4||1/8 to 1/4|
|50 x 50||3 to 6||2"||1/8 to 1/4|
|60 x 60||5 to 6||2.3/8||3/16 to 1/4|
|65 x 65||5 to 6||2.1/2||3/16 to 1/4|
|70 x 70||5 to 6||2.3/4||3/16 to 1/4|
|75 x 75||5 to 6||3"||3/16 to 1/4|
We export our STAINLESS STEEL 202 ANGLE products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at for your instant requirements.