Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@sipipe.com

UNS S41000 Sheets, SS 410 Plates, AISI SS 410 Stainless Steel 410 Sheets Supplier, Manufacturer and Exporter in India


Din 1.4006 SS 410 Plates, SS UNS S41000 Sheets, Stainless Steel 410 Plates, 410 Stainless Steel Sheets Suppliers in India.

Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it's been hardened, tempered, and then polished.


STAINLESS STEEL 410 SHEETS AND PLATES APPLICATIONS:

Applications requiring moderate corrosion resistance and high mechanical properties are ideal for Alloy 410. Examples of applications that frequently used Alloy 410 include:


  • Cutlery
  • Steam and gas turbine blades
  • Kitchen utensils
  • Bolts, nuts, screws
  • Pump and valve parts and shafts
  • Mine ladder rugs
  • Dental and surgical instruments
  • Nozzles
  • Hardened steel balls and seats for oil well pumps

STAINLESS STEEL 410 SHEETS AND PLATES CORROSION RESISTANCE:

  • Good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive environments
  • Its exposure to everyday activities (sports, food preparation) is generally satisfactory when proper cleaning is performed after exposure to use
  • Good corrosion resistance to low concentrations of mild organic and mineral acids

STAINLESS STEEL 410 SHEETS AND PLATES WELDING CHARACTERISTICS:

  • Readily welded by all standard methods
  • To reduce the risk of cracking, it is suggested to pre-heat the work piece to 350 to 400°F (177 to 204°C)
  • Post weld annealing is recommended to retain maximum ductility

STAINLESS STEEL 410 SHEETS AND PLATES HEAT TREAMENT :

  • The proper hot work range is 2000 to 2200°F (1093 to 1204°C)
  • Do not work this material below 1650oF (899°C)

STAINLESS STEEL 410 SHEETS AND PLATES CHEMICAL PROPERTIES:

C Mn Si P S Cr Ni
410 0.15 max 1.00 max 1.00 max 0.04 max 0.03 max min: 11.5
max: 13.5
0.50 max

STAINLESS STEEL 410 SHEETS AND PLATES MECHANICAL PROPERTIES:

Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
410 65 (450) 30 (205) 20 217 96

STAINLESS STEEL 410 SHEETS AND PLATES MECHANICAL PROPERTIES OF HEAT TREATED :

Heat Treatment T410 (0.14%C) Hardened 1800°F (982°C)
Rockwell Hardness 0.2% YS, Ksi (MPa) UTS, Ksi (MPa)
Annealed* 81 HRB 45.4 (313) 80.4 (554)
Hardened & Tempered 400°F (204°C) 43 HRC 156.1 (1076) 202.9 (1399)
Hardened & Tempered 550°F (288°C) 40 HRC 148.3 (1022) 187.0 (1289)
Hardened & Tempered 600°F (316°C) 40 HRC 148.8 (1026) 186.1 (1283)
Hardened & Tempered 800°F (427°C) 41 HRC 132.9 (916) 188.5 (1300)
Hardened & Tempered 900°F (482°C) 41 HRC 122.6 (845) 154.3 (1063)
Hardened & Tempered 1000°F (538°C) 35 HRC 127.9 (882) 154.3 (1063)
Hardened & Tempered 1200°F (649°C) 98 HRB 85.5 (589) 111.2 (767)

STAINLESS STEEL 410 SHEETS AND PLATES PHYSICAL PROPERTIES:

Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.276 14.4 at 212°F 56 at 68°F 29 5.90 at 68 – 392°F 0.11 at 68°F to 212°F 2700 to 2790
6.5 at 68 – 1112°F
STAINLESS STEEL PLATES,GRADES WITH THICKNESS AND WIDTH
Thickness Range of Stainless Plate 3/16″ Thru 6″ Thick Stainless Steel Plate
Common Widths of Stainless Plate Coil 48″ Wide – 60″ Wide – 72″ Wide – 78.75″ (2 Meter) wide – 84″ wide – 96″ wide – 120″ wide & other widths upon customer request.
200-300 Series Stainless Steel Grades 202- 301 – 304 – 304L – 304L Polished – 304H – 309 – 309S – 309H – 310 – 310S – 310H – 316L – 316L Polished – 317L – 317LMN – 321 – 321H – 330 – 347 347H
400 Series Stainless Steel Grades 405 – 410 – 410S – 416 – 420 – 440C
Duplex Stainless Steel Grades LDX 2101 – Duplex 2205 – Duplex 2507
Precipitation Hardening Grades 17-4PH – 17-4 H1150 (per customer request) – 15-5PH
Nickel Alloy Grades Alloy 20 – Alloy 200 – Alloy 400 – Alloy 600 – Alloy 800 – Alloy 800HT – Alloy C-276 (nickel grades may require lead time)

We export our STAINLESS STEEL 410 SHEETS AND PLATES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
SI Pipe
Review Date :
Reviewed Product :
STAINLESS STEEL 410 SHEETS & PLATES
Author Rating
5starstarstarstarstar